Battery Capacity and Power Calculation: Complete Practical Guide for Solar & Системы хранения энергии

Understanding battery capacity and power calculation is essential when designing a solar energy storage system, backup power solution, or off-grid installation. Choosing the wrong battery size can lead to power shortages, wasted investment, or system instability.

This guide explains battery capacity, power ratings, formulas, real examples, and system sizing methods in simple terms.

What Is Battery Capacity?

Battery capacity shows how much energy a battery can store and deliver over time. It is usually measured in:

• Amp-hours (Ах) — current × time
• Watt-hours (Wh) — energy capacity
• Kilowatt-hours (кВтч) — large system storage capacity

Basic Formula

Емкость батареи (Wh) = Voltage (В) × Amp-hours (Ах)

Example:

• 12V 100Ah battery
• Capacity = 12 × 100 = 1,200 Wh = 1.2 кВтч

This is the most important foundation of battery capacity and power calculation.

What Is Battery Power?

Батарея power refers to how fast energy can be delivered at a given moment. It is measured in:

• Watts (Вт)
• Kilowatts (кВт)

Power determines:

• How many devices can run simultaneously
• Whether heavy loads (motors, pumps, air conditioners) can start
• Peak discharge capability

Capacity vs Power — Key Difference

A battery may store a lot of energy but still be unable to deliver high power if its discharge rating is low.

Core Battery Capacity and Power Calculation Formulas

1️⃣ Energy Calculation

Энергия (Wh) = Power (Вт) × Time (часы)

Example:

• Load = 300W
• Runtime = 5 часы

Energy needed = 300 × 5 = 1,500 Wh

2️⃣ Required Battery Capacity

Required Capacity (Ах) = Energy (Wh) ÷ Voltage (В)

Example:

• Required energy = 1,500 Wh
• System voltage = 24V

Capacity = 1,500 ÷ 24 = 62.5 Ах

3️⃣ Include Depth of Discharge (DoD)

Not all stored energy is usable.

• Lead acid DoD ≈ 50%
• LiFePO4 DoD ≈ 80–95%

Adjusted Capacity = Required Capacity ÷ DoD

Example with LiFePO4 (90% DoD):

62.5 ÷ 0.9 = 69 Ах

4️⃣ Add Safety Margin

Add 10–20% for losses and aging:

Final size ≈ 80 Ах

Solar Battery Capacity Calculation Example

Scenario: Home Backup System

Devices:

• Lights = 200W
• Refrigerator = 150W
• TV + Router = 150W

Total load = 500Вт

Required runtime = 6 часы

Energy needed:

500 × 6 = 3,000 Wh = 3 кВтч

Using a 48V LiFePO4 battery:

3,000 ÷ 48 = 62.5 Ах
Adjust for 90% DoD:

62.5 ÷ 0.9 ≈ 70 Ах

Recommended battery: 48V 100Ah LiFePO4

Battery Power Calculation for Load Support

Besides capacity, check discharge power.

Formula:

Max Power = Battery Voltage × Max Discharge Current

Example:

• Battery = 48V
• Max discharge = 100A

Power = 48 × 100 = 4,800Вт (4.8кВт)

Your inverter load must stay within this limit.

Peak vs Continuous Power

Important for battery capacity and power calculation:

• Continuous power = steady output
• Peak power = short burst (motor startup)

Motor loads may require 3–5× startup power.

Always check:

• Battery BMS peak rating
• Inverter surge rating

LiFePO4 vs Lead Acid in Capacity Calculations

This means LiFePO4 systems require smaller nominal capacity for the same usable energy.

Modern suppliers such as КУЛИ (coolienergy.com) provide LiFePO4 batteries with high usable capacity, integrated BMS, and scalable storage for solar projects and OEM systems.

System Voltage and Capacity Planning

Higher voltage systems reduce current and cable loss.

For larger solar storage systems, 48V or higher improves efficiency and safety margins.

Quick Sizing Rule of Thumb

You can estimate battery capacity using:

Daily Energy Use (кВтч) × Backup Days ÷ DoD

Example:

• Daily use = 5 кВтч
• Backup = 1 day
• DoD = 90%

5 ÷ 0.9 = 5.6 kWh battery

Featured Snippet Optimized Answer

Battery capacity is calculated by multiplying battery voltage by amp-hour rating (Wh = V × Ah). Battery power is calculated by multiplying voltage by discharge current (W = V × A). Capacity shows stored energy, while power shows delivery speed.

FAQ – Battery Capacity and Power Calculation

How do I calculate battery capacity for my home?

Multiply your total load (Вт) by runtime (часы) to get Wh, then divide by battery voltage and adjust for DoD.

Is kWh more important than Ah?

For system planning, kWh is more useful because it reflects real energy storage.

Can a high-capacity battery deliver high power?

Not always. You must check maximum discharge current and BMS limits.

Why is LiFePO4 better for energy storage calculation?

Because it allows deeper discharge, higher efficiency, and longer cycle life — reducing required nominal capacity.